What are the characteristics and advantages of the press?

The press can arbitrarily program the stroke, speed, pressure, etc. of the slider, and even reach the nominal tonnage of the press at low speed. Press manufacturer

The characteristics of the press include five stage stroke speed precision press fitting, online press fitting quality judgment, press fitting curve display, Seven press fitting modes for selection, 100 sets of press fitting programs can be set, press fitting data transmission and storage, and five stage stroke speed: fast forward, detection, press fitting, pressure maintaining, return, etc.

As a new mechatronic product, press fitting machine is favored and recognized by more and more enterprises for its energy saving, low noise, good environment, low maintenance cost, excellent controllability and stability. Especially under the premise of paying attention to energy and environment, it is the trend of future development to apply servo press to replace hydraulic and pneumatic press.

Press manufacturer

Compared with the traditional press, the servo press has the following characteristics:

(1) Improve productivity: the stroke length can be set to the small value of Z in production. The forming speed suitable for the content can be maintained.

(2) High product accuracy: through closed-loop feedback control, the accuracy of the bottom dead center. Inhibit the product from burring and prevent the generation of defective products.

(3) Low noise and long die life: through the low noise mode (i.e. reducing the contact speed between the slider and the plate), compared with the general mechanical press, the noise is greatly reduced. And the vibration of the mold is small and the life is long.

(4) Controllability of slider movement: the user can use this feature to develop a slider movement mode suitable for the process, effectively improve the accuracy and stability of the product, improve the life and productivity of the mold, and realize silent blanking, and even expand the range (such as stamping of magnesium alloy), suitable for blanking, drawing, stamping, bending and other processes, as well as the characteristic curves of different materials. If the sliding block can be stopped to maintain pressure, the purpose is to improve the forming quality of the workpiece.

(5) Energy saving: the flywheel, clutch and other energy consuming elements of the traditional mechanical press are eliminated, the driving parts are reduced, and the mechanical transmission structure is simplified; Less lubricating oil and controllable stroke; Since the power consumption is small, the operation cost is greatly reduced.