Maintenance and repair steps of multi station modular machine tool must be one

Maintenance and repair steps of multi station modular machine tool are indispensable. Press manufacturers and auto parts manufacturers should choose Yingkou forging

In recent years, with the rapid development of industry, the multi station modular machine tool, as a high-efficiency and low-cost drilling and tapping device, has been widely used in many industries such as automobile and motorcycle parts, hardware manufacturing, plumbing valves, electronic appliances and so on. And has created enormous economic benefits. So how to maintain the multi station modular machine tool?

1. Before using the multi station modular machine tool each time, you must be familiar with the installation, commissioning and maintenance of the machine tool. Before starting the machine, you should check whether the parts are intact, whether the movement is flexible, whether the workpiece is clamped, and whether the operation is correct. After confirmation, the machine shall be unloaded for five minutes, and high-speed cutting can only be carried out after 15 minutes.

2. The spindle of the multi station modular machine tool uses high-speed lubricating grease. After a period of use, the spindle should be disassembled, the bearing should be cleaned with kerosene, and then the high-speed grease should be applied.

3. 32 # machine oil shall be used for the machine tool, and oil shall be added at least twice per shift.

4. The machine tool shall be kept clean and the chips shall be removed immediately. The moving parts shall be free of water and dirt.

5. Regularly clean the rear column, Z less than once a week

6. Clean the worktop every day.

7. Clean the electric rotary table after completion every day, and remember to add lubricating oil twice a week.

8. Clean the multi shaft gear every day and remember to add lubricating oil.

9. Clean the electrical box and motor every day, check the position of the electrical device, ensure that the electrical device is fixed and tidy, and maintain ventilation. Check whether the ground wire is intact.

Features of multi station modular machine tool:

1. Drilling and tapping procedures can be completed in one clamping, which reduces the number of product clamping and saves the time of product clamping, and effectively improves the production efficiency

2. Only one clamping is required to complete the process, which reduces the probability of product collision and effectively improves the accuracy and appearance of the product.

3. Since the multi station drilling and tapping special machine tool is designed for one part, the same machine tool and the same program are used, and the motion path of the tool is completely the same. And the special machine tool is automatically carried out according to the numerical control program, which can avoid human error, which effectively ensures the consistency of parts and stable quality.

4. A multi station drilling and tapping special machine tool can complete drilling and tapping procedures, replacing several ordinary machine tools, effectively saving the production cost of the enterprise and also saving the floor area.

5. The numerical control system is used for control, so long as the machine tool is started, it can be automatically continuous and the process is completed. This simplifies the operation of workers and greatly reduces the labor intensity.

6. The turntable layout is adopted, and the production efficiency of a multi station drilling and tapping special machine tool is several times higher than that of ordinary machine tools.

7. Because of the high efficiency of the multi station drilling and tapping machine tool, it is suitable for large quantities of parts and components.