Multi station transfer film

Multi station transfer die is a special type of stamping die.

It's special because it doesn't use the material belt as the continuous mold,

It is not like manual production at a single station, and can only complete one or two simple processes. From the perspective of structure, each station is a single station mold, but from the perspective of production process,

Like continuous die, it can realize continuous automatic production. In fact, it has the advantages of continuous mold and engineering mold, but also has the disadvantages of the two molds. The more you look at it, the more confused you become, right? Hehe, today let the unloading board take you to know more about the multi station transfer die.

What is a multi station transfer die the so-called multi station transfer die generally refers to a type of die used on a special multi station punch, which is installed by a number of Engineering dies with process connections according to the process sequence and transmitted by a manipulator.

This definition is made by me. I dare not say it is 100% accurate, but it reflects several important characteristics of multi station transfer die Z:

1 used on multi station punch;

2 each station is a complete engineering mold, which completes a specific process. Each engineering mold (generally called sub mold) has some connections. Z is important. Each sub mold can be adjusted, and the adjustment is generally not limited by the front and rear sub molds;

3. It is transmitted by the manipulator.