Five axis machine tool is a common process in the CNC industry, and it is also a mode with high operating difficulty coefficient! Many people do not know much about five axis machining. Five axis machine tools are generally applicable to aerospace, multi station, military and precision industries. Because the industries they are applied to are valued and very important by the state, the CNC industry also plays a very important role in the whole industry. At the same time, it occupies an important position in the market and has great influence! We all know that the five axis clamping tool is a very important part, which is directly related to our effect. Therefore, to a certain extent, it should be handled in a correct way. What should we pay attention to when we do the work related to clamping tools? Next, let me give you a brief introduction.
1. When clamping, remember to clamp firmly, and not too short in the handle. In addition, before each cable cutter, check whether the cutter meets the requirements. The length of the cable cutter is generally determined according to the depth indicated in the program sheet, which should be slightly longer than the depth value of 2mm, and we should also consider its collision problem!
2. Before installing the cutter head, we should first clean the dust and other unknown objects inside, and the corresponding position of the tool sleeve of the machine tool should also be clean to avoid iron chips on the mating surface affecting the accuracy and damaging the machine tool.
3. When the program is interrupted or the tool needs to be adjusted again, we can carefully observe whether the depth can meet the front. There are also rotary retractable tool heads. Generally, water-soluble cutting fluid is used. To a certain extent, it is used to soak lubricating oil for several hours for maintenance. Remember to maintain regularly. It is recommended to maintain every month!